![](Images/banner1.jpg) Your #1 Source for Lens Tinting Equipment and Supplies |
|
BPI® AR Dry™
![](Images/ar-dry.gif)
|
BPI® AR Dry™ Safety Set-up Kit
![](Images/ardry-kit.gif)
|
PC: 80910 Refill single pack of AR Dry™
PC: 80909 Refill 3-pack of AR Dry™ |
PC: 80908
Safety Set-up Kit with 1 AR Dry™ (Must be purchased) |
Easy to use BPI® AR Dry™removes AR coatings and returns lenses to their original condition in only a few minutes. The lens can be re-coated with AR, UV treated, or colored with any BPI® tint desired. BPI® AR Dry™ will also remove most hard coats if lenses are treated for prolonged periods of time. The BPI® AR Dry™ kit comprises: safety gloves and goggles, plastic tank with integral lens holder, operational and safety instructions and a pack of BPI® AR Dry™. Please call for pricing and availability.
|
This product carries an additional shipping surcharge.SHIPPING RESTRICTIONS: This product can only be
transported by ground services.
Lab Safety
Because of the nature of this product, a Safety Set-Up Kit must be purchased. This kit includes:
• Safety gloves
• Safety glasses
• Plastic tank with integral lens holder
• Operational and safety instructions
• 1 Pack of BPI® AR Dry™
Replacement single and three packs of AR Dry™ are available after purchase of the Safety Set-up Kit.
WARNING:
Do not use on glass or polycarbonate lenses
May remove hard coatings of
CR-39® lenses.. |
How to use BPI® AR Dry™
PREPARATION. Carefully open the bottle and pour contents into 1 quart (946 ml) BPI® plastic container. Fill approximately 2/3 full with water and allow to stand for 20 minutes.
EASY TO USE. Wear gloves and safety glasses. Use BPI® plastic lens holder to immerse lenses for no longer than 30 seconds. Remove and rinse well with water. Examine lens for complete removal of AR coating. Repeat if necessary. Thoroughly rinse the lens holder with water when finished.
HARDCOATS. If lenses are left in the solution for longer periods of time, many hardcoats will be removed. To remove hardcoats, immerse lens in AR-Dry™ solution to soften hardcoat. Rinse. Rub with paper towel dipped in alcohol to remove hardcoat. Repeat, if necessary. |
Read MSDS. This product contains acids. Do not allow in contact with skin or clothing. If contact occurs, flush immediately with water. DO NOT INHALE OR INGEST. DO NOT STORE IN GLASS CONTAINERS. Solution in water is corrosive and will etch glass. Store only in a BPI® plastic bottle. DO NOT ALLOW CONTACT WITH METALS. Use ONLY in the 1 quart container provided. Wear gloves & safety goggles during use. Wash hands well after use. Avoid skin and eye contact as severe burns may result. Use only at room temperature by qualified lab personnel. |
BPI® is the
world’s largest manufacturer of optical tints that
are used by opticians, optometrists and
ophthalmologists in tinting, dying, or otherwise
coloring clear plastic – especially optical
sunglass lenses. BPI® also produces lines of
therapeutic tints providing UV protection and
aiding with problems such as blepharospasms,
headaches, retinitis pigmentosa, color blindness,
corneal dystrophys, macular degeneration, retinal
damage and dyslexia. BPI® has specialty tints such
as EVA for viewing computer monitors and Solar
Dyes for the finest sunglasses. BPI® also
manufactures laboratory equipment such as tinting
instruments, photometers, ultrasonic cleaners,
edgers (for edging lenses), gradient lensors (for
producing gradation of tint on lenses) and ovens
for heat and chemical tempering of glass lenses
for safety glasses and eyewear. BPI® supports all
optical lens and sunglass manufacturers and
optical laboratories.
Brain Power Inc, 4470 SW 74 Avenue, Miami Florida, 33155 • Telephone: 305-264-4465 • Toll Free: 1-800-225-5274
|
ALL PAGES WITHIN THIS WEBSITE ARE © 2006 BPI®. All specific names mentioned herein are trademarks of Brain Power Inc®. Miami. Florida. The following are registered trademarks with the US Patent Office and with similar offices in other countries: Transchromatic®, Solar Sun®, There isn’t a lens we can’t improve®, Safari®, Designed Spectrum®, Blue Barrier®, Brain Power Inc.®, BPI®, Buy now, save later®, Dye Hard®, EVA®, Spectracolor®, Safari®, Solar®, The Pill® and Ziptint®. The BPI® bottle shape and design are trademarks of BPI®. BPI® is not responsible for typographical errors. Offers subject to change without notice. Any prices quoted do not include sales tax or shipping charges. Item availability and price are subject to change without notice. |
|