Your #1 Source for Lens Tinting Equipment and Supplies
Lens Holder II
UV Lens Holder
3 Point Lens Holder
Slant Lens Holder II
PC: 9600
PC: 8300
PC: 9603
PC: 9700
The original and most popular. Used by more than 40,000 labs. Holds two lenses. Stainless steel and heat resistant plastic. Only BPI’s unique torsion bar design prevents lens warping, scratching, and bending of the lenses while tinting.
The white color makes the holder visibly different and will show color if inadvertently immersed in tint.  This makes it ideal for UV tinting and other operations that need to be kept isolated from cross-contamination.
Perfect for lenses of unusual shapes. The BPI Three Point Lens Holder II™ holds two lenses. It is made from stainless steel and heat resistant plastic. The upper clamp has one point of contact with the lens.
The lenses are held at an angle instead of vertical allowing the creation of smooth and subtle gradients. Ideal for pilot or asymmetrical lenses.
Note: It will not fit into mini tanks.

UNIQUE
TORSION BAR
DESIGN

As the adjustable clamp moves up and down the stainless steel guides, the torsion bars flex to keep the clamp and the lenses firmly in place and eliminate slippage.

NO PRESSURE IS
EXERTED ON
THE LENS!
3 POINTS OF
CONTACT CAN BE
BETTER THAN 4
RED ARROWS (L) INDICATE MID-POINT 
OF GRADIENT
WHEN TINTING
SOME UNUSUAL
LENS SHAPES
When the lens is rotated to the vertical the mid-point is now at different heights on the front and the back of the lens.
Bouncer Slant Lens Holder II™
Bouncer Lens Holder II™
Dual Lens Holder II™

Triple Pair Lens Holder II™

PC: 9604
PC: 9601
PC: 9500
PC: 11901
The spring action enhances the gradient shading while the lenses are held at an angle allowing the creation of smooth and subtle gradients
This lens holder can hold two pairs of different sized lenses.
Holds six lenses. It is made from stainless steel and heat resistant plastic.
Note: It will not fit into mini tanks. (Pint, 0.47L)
The spring stretches and contracts during the gradient process. It can be used in Mini-Tanks. (Pint, 0.47L)
Also available: BPI® White Dual UV Lens Holder II™
PC: 9501
This lens holder can hold three pairs of the same size lenses.
 
Stainless Steel Lens Holder™
4 Pair Lens rack™
12 Pair Lens Rack™
12 Pair Lens Rack II™

PC:10900 Large 8in (20.3cm)
PC: 66100
PC: 66900
PC: 66904
PC: 10800 Medium 5.88in (14.9cm)
Holds eight lenses. (Four pairs of different sized lenses). It is made from stainless steel and heat resistant plastic. It should be used for tinting UV lenses only.
Holds up to 24 lenses. It is made from stainless steel. This lens rack is ideal for cleaning or tinting multiple pairs of lenses in large volume machines. Coiled wire springs hold the lenses firmly but gently
It has been designed to protect the most sensitive of lenses. (For example, those with anti-reflection coatings). The lenses rest in a grooved plastic rod and are gently held down with coated wire springs.
PC: 11000 Small 3.75in (9.52cm)
Each Stainless Steel Lens Holder holds a single lens. It is made from stainless steel for long life and easy maintenance.
Height: 5in (12.7cm)
Height: 10.5in (26.7cm)
Height: 11in (27.9cm)
Width: 5in (12.7cm)
Width: 11in (27.94cm)
Width: 11.5in (29.2cm)
Depth: 2in (5.1cm)
Deoth: 7.63in (19.4cm)
Depth: 5.5in (14cm)
 
16 Pair Lens Rack™
21 Pair Lens Rack™
36 Pair Lens Rack™
20 Pair Lens Rack™
PC: 66901
PC: 15600
PC: 15500
PC: 15603
Holds up to 32 lenses. It is made from stainless steel and heat resistant plastic. This lens rack should be used only for cleaning or UV tinting multiple pairs of lenses in large volume machines.
It is made from stainless steel and heat resistant plastic. It is ideal for cleaning or tinting multiple pairs of lenses. Plastic beads keep the lenses from touching each other. Lens blanks must be the same size.
It is made from stainless steel and heat resistant plastic. It is ideal for cleaning or tinting multiple pairs of lenses. Plastic beads keep the lenses from touching each other. Lens blanks must be the same size.
20 pair Production A/R Lens Rack™
The BPI non-metal Production A/R stripper lens rack, measures 10” (25.4cm) left to right and 7.25” (18.4cm) front to back.
It holds 40 lenses and is compatible with BPI A/R Dry stripper solutions. BPI can also supply a compatible tank for use with this rack. The rack may be used with uncut lenses, although it may be adjusted to hold smaller lenses if they are all of the same size.
Width: 9.5in (24.13cm)
Depth: 6in (15.24cm)
Width: 10in (25.4cm)
Depth: 7.25in (18.4cm)
Width: 17in (43.2cm)
Depth: 7.25in (18.4cm)
Please call for pricing and availability.

BPI® is the world’s largest manufacturer of optical tints that are used by opticians, optometrists and ophthalmologists in tinting, dying, or otherwise coloring clear plastic – especially optical sunglass lenses. BPI® also produces lines of therapeutic tints providing UV protection and aiding with problems such as blepharospasms, headaches, retinitis pigmentosa, color blindness, corneal dystrophys, macular degeneration, retinal damage and dyslexia. BPI® has specialty tints such as EVA for viewing computer monitors and Solar Dyes for the finest sunglasses. BPI® also manufactures laboratory equipment such as tinting instruments, photometers, ultrasonic cleaners, edgers (for edging lenses), gradient lensors (for producing gradation of tint on lenses) and ovens for heat and chemical tempering of glass lenses for safety glasses and eyewear. BPI® supports all optical lens and sunglass manufacturers and optical laboratories.

Brain Power Inc, 4470 SW 74 Avenue, Miami Florida, 33155 • Telephone: 305-264-4465 • Toll Free: 1-800-225-5274

ALL PAGES WITHIN THIS WEBSITE ARE © 2006 BPI®. All specific names mentioned herein are trademarks of Brain Power Inc®. Miami. Florida. The following are registered trademarks with the US Patent Office and with similar offices in other countries: Transchromatic®, Solar Sun®, There isn’t a lens we can’t improve®, Safari®, Designed Spectrum®, Blue Barrier®, Brain Power Inc.®, BPI®, Buy now, save later®, Dye Hard®, EVA®, Spectracolor®, Safari®, Solar®, The Pill® and Ziptint®. The BPI® bottle shape and design are trademarks of BPI®. BPI® is not responsible for typographical errors. Offers subject to change without notice. Any prices quoted do not include sales tax or shipping charges. Item availability and price are subject to change without notice.