Your #1 Source for Lens Tinting Equipment and Supplies
Lens Prep II™

Poly Prep™

Activator™

BPI® Lens Prep II™ BPI® PolyPrep™ BPI® Activator™
PC: 70200 Quart (946 ml) PC: 41310 Quart (946 ml) PC: 41501 Quart (946 ml)
PC: 72400 Gallon (3.79L) PC: 41300 Gallon (3.79L)  

BPI® Lens Prep II™ conditions lenses before tinting
Lens Prep II™ conditions plastic lenses with a special ionizing agent that leaves a positive charge on lens surfaces. This enables the lenses to quickly and evenly absorb negatively charged BPI Molecular Catalytic™ tints. Lens Prep II™ dissolves oil and grease. Can be used cold, but works best when heated in your lens tinting instrument. Lens Prep II™ is available in quarts or gallons.

Lens Prep II™ is an important ingredient of the Molecular Catalytic™ tinting systems. It ionizes the lens positively with a special coating that allows it to exhibit a charged interface opposite to that of the dye. This potential difference attracts the dye ions to the lens surface for fast color absorption. Lens Prep II™ is a concentrate and should be diluted approximately one ounce to 32 ounces (25.5 ml to 946 ml) of water. Be sure not to use too much, or else streaking will occur because of the unevenness of the positive charge on the lens. It should be changed every 3-4 days, depending on use. Do not rinse or wipe lens after using Lens Prep II™; to do so will negate its effectiveness.

BPI® Activator™ conditions hard-coated lenses before tinting
Activator™ conditions lenses with factory hard coatings that would otherwise be difficult to tint so they receive dye quicker and more evenly. Not suitable for polycarbonate. BPI Activator should be tested on a scrap lens of the same type before use.
BPI® PolyPrep™ for the preparation of uncoated polycarbonate lenses
Diluted with water, PolyPrep™ is a primary bath that prepares polycarbonate lenses for uniform tinting
Please call for pricing and availability.
Polycarbonate Energizer™

Acrylic Energizer™

PC: 41100 16 oz (473 ml) PC# 41101 16 oz (473 ml)
BPI® Polycarbonate Energizer for use with BPI® (2 part) Polycarbonate tints.
BPI® Acrylic Energizer speeds up the tinting of uncoated acrylic lenses.

BPI® is the world’s largest manufacturer of optical tints that are used by opticians, optometrists and ophthalmologists in tinting, dying, or otherwise coloring clear plastic – especially optical sunglass lenses. BPI® also produces lines of therapeutic tints providing UV protection and aiding with problems such as blepharospasms, headaches, retinitis pigmentosa, color blindness, corneal dystrophys, macular degeneration, retinal damage and dyslexia. BPI® has specialty tints such as EVA for viewing computer monitors and Solar Dyes for the finest sunglasses. BPI® also manufactures laboratory equipment such as tinting instruments, photometers, ultrasonic cleaners, edgers (for edging lenses), gradient lensors (for producing gradation of tint on lenses) and ovens for heat and chemical tempering of glass lenses for safety glasses and eyewear. BPI® supports all optical lens and sunglass manufacturers and optical laboratories.

Brain Power Inc, 4470 SW 74 Avenue, Miami Florida, 33155 • Telephone: 305-264-4465 • Toll Free: 1-800-225-5274

ALL PAGES WITHIN THIS WEBSITE ARE © 2006 BPI®. All specific names mentioned herein are trademarks of Brain Power Inc®. Miami. Florida. The following are registered trademarks with the US Patent Office and with similar offices in other countries: Transchromatic®, Solar Sun®, There isn’t a lens we can’t improve®, Safari®, Designed Spectrum®, Blue Barrier®, Brain Power Inc.®, BPI®, Buy now, save later®, Dye Hard®, EVA®, Spectracolor®, Safari®, Solar®, The Pill® and Ziptint®. The BPI® bottle shape and design are trademarks of BPI®. BPI® is not responsible for typographical errors. Offers subject to change without notice. Any prices quoted do not include sales tax or shipping charges. Item availability and price are subject to change without notice.